Support PA 1000 E - Integrated Amplifier
Support
Specifications
Specifications power-amplifier
Nominal output per channel 4 Ohms / 8 Ohms
2 x 250 Watts / 2 x 140 Watts
Peak output per channel 4 Ohm / 8 Ohm
2 x 400 Watts / 2 x 220 Watts
Frequency response -3dB
1 Hz - 60 kHz
Total harmonic distortion / Intermodulation
< 0,004 % / < 0,004 %
Pre amplifier (PRE, REC)
Frequency response
1 Hz - 300 kHz
Total harmonic distortion
0,0025 %
Signal / noise ratio
108 dBA
Channel separation
> 82 dB
Inputs 5 x unbalanced (RCA)
250 mVeff ... 3 Veff / 20 kOhms
Inputs 5 x balanced (XLR)
500 mVeff ... 6 Veff / 5 kOhms
Outputs 2 x unbalanced (RCA)
PRE OUT, REC OUT 2,5 Veff / 50 Ohms;
Headphones 6,3 mm plug > 32 Ohms
Mains / Accessories / Dimensions
Optional accessories
plug-in phono module MM, 1 - 5 mV, 16 capacitance values
plug-in phono module MC, 60 - 1000 µV, 16 impedance values
Remote control
via MP 1000 E or
optional remote control set FBS SRC 1
Mains
220-230 V or 110-115 V, 50-60 Hz, 600 Watts
Standby
< 0,3 Watts
Dimensions (H x W x D)
11,5 x 44 x 38 in cm
Weight
14 kg
Finishes
Silver case + black side panels. Silver case + silver side panels.
Black case + black side panels. Black case + silver side panels.
Optional Accessories
Technical modifications reserved